Vinyl stair nosing – Manufacturers make vinyl floors in squares, one-piece sheets and planks. Planks mimic the grain and size of hardwood floors, so it distinguishes them from hardwood or laminated very hard coatings. Homeowners install vinyl planks on floors and stair lifts through a house like an economically and visually pleasing floor and deck step. Vinyl planks are easy to care for and maintain.
Many vinyl stair nosing are easy to cut and have a self-adhesive backing to self-install a snap. Spray a rag, sponge or paper towel with a multi-purpose cleaner and clean the stair lifts, which is the stair section the toes kick up the stairs, to remove dirt and oils. Scrape the peeling paint from the strips with a paint scraper. Empty the stairs to remove traces of paint and dust. Hold a large piece of heavy paper on the step. Trace the size and shape of the step with a pencil. Cut the step shape with scissors. Label the pattern to correspond to the step. Not all stair bands are the same size. Repeat this process for each elevator.
12 Photos Gallery of: Installing Vinyl Stair Nosing
Place enough vinyl stair nosing, firmly butted together, on a work table with the unfinished side facing up to mimic the length and width of the step. If you do not have a work table, there was a sheet of plywood on the floor and put the boards on top of the plywood. Alternate the tables, so the background lines do not match.