Teak drop leaf dining table – For dining rooms or kitchens that do not have much space. Sometimes it becomes necessary to adjust the company, a flap table is a useful item. Drop-leaf tables have pivoting ends that you can raise or lower depending on the amount needed for table rooms. Table hinges can be worn out or fall out after years of diligent use. Replacing the old hinge with a new one takes little effort, skill or tools.
Turn the teak drop leaf dining table upside down and open the flaps so that they are flat on the floor. Put a mark where the stick in the hinge is on the underside of the table to help you know exactly where to place the new hinge. Remove the old hinge if it is still attached. Use a screwdriver to remove all screws and save hinges in a plastic zipper bag to get to the hardware store with you. Go to the hardware store and buy a new hinge that is as close as possible to the old hinge in size and design.
12 Photos Gallery of: Installing Hinge on a Teak Drop Leaf Dining Table
Ask a shop employee to assist you when needed. Hold the teak drop leaf dining table on the floor to attach the new hinge. Screw the screws with a screwdriver. Turn the side upside down and test the hinge to see if it is in the correct position. Adjust hinges, if necessary, by removing it and installing it in a somewhat different position.