Rubber stair treads provide a non-slip surface to install on every step of a staircase, especially outdoors. Treadmills reduce the risk of falling or losing the balance. Attached rubber safety slides to your stairs are a two-step process that involves glue and screws to hold the material in place. The project is not complicated, but it is time consuming.
Ideas for install rubber stair treads, place a rubber stairway over the step and position in the center with the unfinished side of the tread down. Drill a test hole through the pre-drilled hole at each end of the tread at least one inch in steps below. Repeat for each step on the stairs.
12 Photos Gallery of: Ideas for Install Rubber Stair Treads
Then to install rubber stair treads, lay pearls of rubber cement glue on the unfinished side of the stairway tread with glue gun, then turn and press the step, adjust the pre-drilled holes in the tread staircase with two holes drilled in steps. Apply glue sparingly to avoid siphoning from underneath the stairway tread, which will cause a single mess and potential stains on the ladder. Attach the flat head screws through each staircase to the pre-drilled holes in the step, sharpening with the screwdriver. The bolts must be level with the steps to prevent stuck feet and potentially cause damage to the stairs.