Teak corner shower bench – Teak is a tree naturally found in the eastern hemisphere. It is a hardwood that is known to have excellent resistance to moisture. Teak is an expensive tree in the United States because of how far it is to be sent, but preferred to shower benches and other furniture as consumers because of its beautiful appearance. Building a teak shower bench will be more expensive than building a similar bench out of cedar wood; however, it will cost considerably less to build your own than it would buy one.
Lay two 16-inch boards on the edge, parallel and 9 inches apart. Place the 9-inch boards between them so that they are perpendicular to the 16-inch teak boards and 14 inches apart. Screw through 16-inch boards and at the ends of 9-inch teak boards. It is the frame for your teak corner shower bench. Lay the frame flat and place 15-inch teak boards perpendicular to the inner corners of the frame. Screw through the corners of the frame using four screws for each corner to secure the 15-inch boards. These boards are the legs of your bench.
12 Photos Gallery of: Good Teak Corner Shower Bench Design
Ideas for make teak corner shower bench place the bench upright and screw 11-inch boards to the top of the frame. They should be parallel to 11-inch sides of the frame. The ends must flush with the 16-inch side of the frame. The two outer boards must flush with the 11-inch sides of the frame. Sand down the bench with medium and then fine sandpaper to prevent splinters. Wipe the bench with a damp cloth before use.