The sector of the stairs is one of the most visited and visible places in the house. Install a carpet stair treads, makes the wooden steps do not wear or scratch, also adds a touch of decoration. When placing the carpet, you must start from the top of the stairs. Place the roll of the carpet, between the marks made with the pencil in the first step, and push the roll towards the strip without rivet on the back of the step.
The front edge of the extruder is placed on the lever at the center of the carpet stair treads, 5 centimeters from the riser. With one may, lean on the front knob of the stretcher and with the other hold the gripper, and then with the knee strikes and the carpet should remain on the strip without rivet. You must repeat this process on both sides of the center 7 centimeters from it.
12 Photos Gallery of: Appealing Carpet Stair Treads
Then you must smooth the carpet to the bottom of the fingerprint, and then, using an upholstery tool, push towards the corner that forms the riser and the next step so that it is attached to the strip without rivet. Continue with this process for each step, although you should be sure to measure that the carpet stair treads is aligned with the marks. Finally, with a blade cut the carpet at the bottom and put the edge inside the strip without rivet on the riser of the last step of your ladder.